This publication is intended to help customers and system engineers to understand and utilize the new features in Version 2.0 of OS/2. The information in this publication is not intended as the specification of the programming interfaces that are provided by the Programming Tools and Information package for use by customers in writing programs to request or receive its services. See the PUBLICATIONS SECTION of the IBM Programming Announcement for OS/2 Version 2.0.
References in this publication to IBM products, programs or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only IBM's product, program, or service may be used. Any functionally equivalent program that does not infringe any of IBM's intellectual property rights may be used instead of the IBM product, program or service.
Information in this book was developed in conjunction with use of the equipment specified, and is limited in application to those specific hardware and software products and levels.
IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to the IBM Director of Commercial Relations, IBM Corporation, Purchase, NY 10577.
The information contained in this document has not been submitted to any formal IBM test and is distributed AS IS. The information about non-IBM ("vendor") products in this manual has been supplied by the vendor and IBM assumes no responsibility for its accuracy completeness. The use of this information or the implementation of any of these techniques is a customer responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. While each item may have been reviewed by IBM for accuracy in a specific situation, there is no guarantee that the same or similar results will be obtained elsewhere. Customers attempting to adapt these techniques to their own environments do so at their own risk.
References in this publication to IBM products, programs or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only IBM's product, program, or service may be used. Any functionally equivalent program that does not infringe any of IBM's intellectual property rights may be used instead of the IBM product, program or service.
This document has not been subjected to any formal review and has not been checked for technical accuracy. Results may be individually evaluated for applicability to a particular installation. You may discuss pertinent information from this document with a customer, and you may abstract pertinent information for presentation to your customers. However, any code included is for internal information purposes only and may not be given to customers. If included code is identified as incidental programming, its use must conform to the guidelines in the relevant section of the sales manual.
Any performance data contained in this document was obtained in a controlled environment based on the use of specific data and is presented only to illustrate techniques and procedures to assist IBM personnel to better understand IBM products. The results that may be obtained in other operating environments may vary significantly. Users of this document should verify the applicable data in their specific environment. No performance data may be abstracted or reproduced and given to non-IBM personnel without prior written approval by Business Practices.
Any performance data contained in this document was determined in a controlled environment, and therefore, the results that may be obtained in other operating environments may vary significantly. Users of this document should verify the applicable data for their specific environment.
The following document contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples contain the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.
Reference to PTF numbers that have not been released through the normal distribution process does not imply general availability. The purpose of including these reference numbers is to alert IBM customers to specific information relative to the implementation of the PTF when it becomes available to each customer according to the normal IBM PTF distribution process.
You can reproduce a page in this document as a transparency, if that page has the copyright notice on it. The copyright notice must appear on each page being reproduced.
The following terms, which are denoted by an asterisk (*) in this publication,
are trademarks of the International Business Machines Corporation in the
United States and/or other countries: AIX
C/2
IBM
Micro Channel
Operating System/2
OS/2
PC AT
Personal System/1
Personal System/2
Presentation Manager
PS/1
PS/2
SAA
Systems Application Architecture
WIN-OS/2
Workplace Shell
The following terms, which are denoted by a double asterisk (**) in this
publication, are trademarks of other companies. CompuServe is a trademark
of CompuServe Incorporated.
HP and Hewlett-Packard are trademarks of Hewlett-Packard Corporation.
Intel is a trademark of Intel Corporation.
Logitech is a trademark of Logitech, Incorporated.
Lotus is a trademark of the Lotus Development Corporation.
MicroMaster is a registered trademark of AOX Inc.
Microsoft is a trademark of Microsoft Corporation.
Windows is a trademark of Microsoft Corporation.
Xenix is a trademark of Microsoft Corporation.
386, 486, SX are trademarks of Intel Corporation.
80286, 80386 and 80486 are trademarks of Intel Corporation.